VERSA-BAR
continuous cast gray and ductile iron is a metallurgically superior
product, compared to coventional sand cast iron. The unique production process
of continuously casting the molten iron through a water cooled graphite die
yields a fine-grain microstructure. This tightly controlled molding process
makes for a consistently uniform metal. VERSA-BAR is free of the typical
closed mold types of defects, such as porosity caused by shrinkage and trapped
gases.
LOWER COSTS
are generated when VERSA-BAR is used. Unlike other castings there are no
tooling changes. You are able to use what you buy, because scrap generated from
foundry defects are virtually eliminated. The unique microstructure offers a
consistently sound and uniform material which, along with the well dispersed
graphite in VERSA-BAR, improves machining rates and increases your tool life.
This results in a lower per part machining cost. Not only will this hold true
compared to sand cast iron, but you can also find improved economy by
substituting VERSA-BAR for other higher priced or harder machining materials.
PERFORMANCE
is also improved by the metallurgical make-up of VERSA-BAR. The high graphite
content is a natural self-lubricant. Plus, the tiny recesses in the flakes or
spheres of graphite retain the addition of other lubricants. Therefore, your
parts wear longer. Whether you're looking for high tensile strengths, bearing
strengths or wear strengths, there is a VERSA-BAR grade to meet most physical
requirements.
VERSA-BAR SHAPES AND SIZES
Rounds:
0.625" = 21.000" Dia.
Squares:
1.250" - 18.500" SQ. (Larger upon request.)
Tubes:
Stock and Custom I.D.'s with O.D.'s up to 18.000".
Rectangles:
Stock and Custom Cut Available up to 14"x21.00"x72.00".
Shapes:
Custom Cast to your Design.
Notes: